由于各种各样的原因，如工作中推进水流时产生的涡流，气蚀不可避免的会产生振动;水泵设备入口管、叶轮内、泵内有杂物而发生共振现象等，怎么解决喷泉设备的水泵工作时带来的噪声及振动，有些因素是不能避免的，而有些却是可以避免的。

　　一、水泵设备工作了一段时间后，要对设备进行检修，对于一些老化的设备要及时地更换，这是因为由于使用时间较长，喷泉设备的水泵设备磨损老化：叶轮松动;轴承损坏或轴承间隙大，容易产生共振现象等。

　　二、选择水泵设备时一定要选择制造工艺好的，要是制造工艺不过关如转子不平衡、喷泉设备的水泵与电机轴不同心、转子与定子部分发生碰撞或磨擦等，这些都是产生共振现象的源泉，所以在制造工艺上面一定要严格把关，选择制造工艺过关的喷泉设备的水泵设备。

　　以上介绍的两种解决方法是从能够避免的一些因素出发的，但是，有很多产生共振的因素是无法避免的，这就要求我们除了对喷泉设备的水泵本身制造工艺进行加强，降低振动幅度外，还要积极地探究并找出更多的方法，这无疑又为更多的喷泉设备的爱好者提供了一研究课题

Cavitation will inevitably produce vibration due to various reasons, such as eddy current generated when the water is pushed in the work; Pump equipment inlet pipe, impeller, pump internal debris and resonance phenomenon, how to solve the fountain equipment pump work noise and vibration, some factors can not be avoided, but some can be avoided.

1, pump equipment work for a period of time, to repair the equipment, for some aging equipment to timely replacement, this is because of the use of time is long, the fountain equipment pump equipment wear aging: impeller loose; Bearing damage or large bearing clearance, easy to produce resonance phenomenon.

Second, when selecting pump equipment must choose good workmanship, if manufacturing process does not pass such as rotor unbalance, fountain equipment of different heart pump and motor shaft, rotor and stator part of collision or friction, these are the source of produce resonance phenomenon, it must be strictly controlled, so in the manufacturing process selection manufacturing process pass fountain pump equipment.

Above two solutions from can avoid some of the elements, however, there are many factors produce resonance is unavoidable, this requests us in addition to the pump itself on fountain equipment manufacturing technology to strengthen, to reduce the vibration amplitude, and actively explore and find out more ways, it again for more enthusiasts to provide a research topic of fountain equipment